Rental Mode; Tonometer Settings - Icare HOME2 Instruction Manual

SETTINGS
PRACTICE
MODE
1. Press and hold down
2. Press until you see
3. Press
4. Press until you see
5. Press
6. Insert the probe to the tonometer.
7. Press
8. Adjust the tonometer to your face and press
When the tonometer shows your success rate, press the navigation buttons
to see what kind of errors occurred during the practice measurements. To
measure again, press

10.2 Rental mode

With the iCare CLINIC software, the healthcare professional can set the
tonometer to the rental mode which allows the healthcare professional to
set a rental time for the tonometer. During the rental time, the patient can
take measurements with the tonometer. Once the rental time expires, the
patient can no longer take measurements with the tonometer.
For instructions on setting the rental mode, see the iCare CLINIC, EXPORT
and PATIENT2 Instruction Manual for Healthcare Professionals.
To see when the rental expires:
1. Press and hold down
2. Press until you see INFO.
3. Press
4. Press .
5. To exit the view, press
RENTAL
EXPIRES
dd.mm.yyyy
hr:min
11

Tonometer settings

1. Press and hold down
2. Press until you see
26
70
START
SETTINGS
.
PRACTICE MODE
.
.
, or press
.
SETTINGS
SUCCESSFUL: ERRORS:
7 1 TOO FAR
1 TOO NEAR
ERRORS: 0 ALIGNMENT
%
3 1 REPEAT
to switch on the tonometer.
on the display.
on the display.
to return to the settings.
to switch on the tonometer.
.
to switch on the tonometer.
on the display.
10 times.