Get Started; Insert The Batteries - Icare HOME2 Instruction Manual

7

Get started

WARNING! The tonometer must not be dropped. To avoid dropping the tonometer and
to ensure safe handling, always use the wrist strap to keep the tonometer attached to
your wrist when in use. If the tonometer is dropped and the tonometer casing opens,
press the casing to close the openings.
PRECAUTION! When removing the tonometer from its packaging, and each time before
use, visually inspect the tonometer for any external damage, particularly for possible
damage to the tonometer casing. If you suspect damage to the tonometer, contact the
manufacturer or the distributor of the tonometer.
7.1

Insert the batteries

WARNING! Remove the batteries from the tonometer if it is not likely to be used for
some time.
PRECAUTION! Use only the battery type specified in the technical specification section
of this manual. Do not use rechargeable batteries, as they do not have sufficient voltage.
NOTE! The quality of the batteries affects the number of measurements that can be taken with
a single set of batteries.
NOTE! Replace all batteries with new ones at the same time.
1. Use the screwdriver to open the battery cover and open it up.
The batteries are in the tonometer carrying case under the box of
probes.
2. Insert the batteries according to the markings inside the battery
compartment.
14