Table of Contents
Advertisement
MAN – FD320LIFT-LP Ver HD
Operation Instructions
The FD320LIFT-LP Ver HD is continuously on but can be de-energized by removing
power from the entertainment system. No pilot or aircrew action is necessary during
flight or ground operation.
The passengers will be able to change the video output from the FD320LIFT-LP Ver
HD using the video source select button with the included IR remote. Point the IR
remote towards the top of the LCD to cycle thru the different sources.
When applying 28VDC power, the display will turn on and search for a valid input on
the last known source. If no input is found, the display will go to standby mode.
Pressing the Source button will select new video input.
Button Controls
While the lift is in use, there is no access to the buttons on the LCD. All control is with
the remote.
BUTTON
POWER
SOURCE Select video source with the following order: RGB (PC),
UP
DOWN
MENU
All manuals and user guides at all-guides.com
DESCRIPTION
Pressing will turn the monitor ON or OFF from Standby
mode.
Composite, S-Video, HDMI-1, HDMI-2
Press while in menu- Adjust selection UP.
Press out of menu – Brightness (Use up or down to
change.)
Press while in menu- Adjust selection DOWN.
Press out of menu – Contrast (Use up or down to
change.)
Opens the menu, changes between selections.
Rev:
Revision Date:
08/27/2012
C
Page 16 of 22
Advertisement
Table of Contents
