Setting The Alarm; Activating The Alarm Function - Sandstrom S1RADB11E Instruction Manual

Setting the Alarm

1. While in standby mode, press and hold the
ALARM button to set the alarm. The " " icon will
show on the display.
2. Press the buttons repeatedly to adjust the
hour digits. Press the ALARM button to confirm.
3. Press the buttons repeatedly to adjust the
minute digits. Press the ALARM button to confirm.
4. Press the buttons to select alarm volume
level. Press the ALARM button to confirm.
5. Press the buttons to select preset radio
station. Press the ALARM button to confirm.
6. Press the buttons to select buzzer tone (Hi/
Lo). Press the ALARM button to confirm.
7. The alarm setting is now complete.
To check your preset alarm time, press the ALARM button at anytime.

Activating the Alarm Function

1. To activate the alarm function, press the ALARM button repeatedly. The alarm wake-
up modes will be displayed and switch as the sequence below on every press:
OFF
When the display shows your desired alarm wake-up mode, stop pressing the ALARM
2.
button. The alarm function is now activated and an alarm icon will be displayed.
3. When the alarm time is reached, the selected wake-up mode will be on and the alarm
icon in the display will flash to indicate that the alarm is triggered. To disable the alarm
function, press the STANDBY button.
If USB mode is selected, but no USB is inserted or the music files cannot not be
played, it will automatically switch to Buzzer mode.
TUNER USB BUZZER
GB
HI
15