Hints and Tips
If a problem does occur, it may often be due to something very minor. The following table
contains various tips.
Problem
No Sound
Static Sound
Sound is distorted
Desired station not found Poor reception. Adjust the position of the aerial.
The LCD display is blank
Specifications
Model
Power Supply
Output Power
Frequency
USB Interface
USB Memory
Weight:
Dimensions:
Features and specifications are subject to change without prior notice.
Adjust the volume control, it may not be turned up.
Signal reception is too low. Adjust the aerial or move the unit
to a stronger signal location.
Volume is too high. Adjust the volume control.
This may occur if the broadcaster changes the label of a
service or removes a label while tuned. The unit will try to
retune or perform a scan.
S1RADB11E / S1RADW11E / S1RADWN11E
AC 230V 50Hz
5.0W
FM 88 – 108 MHz
USB 1.1 (USB hub not supported)
USB 1.1 Flash
USB 2.0 High-speed Flash
Support up to 16GB
1.4kg
220mm(L) x 112.5mm(W) x 135mm(H)
Solution
GB
19