Basic Operation; Powering On/Off; Selecting Mode; Adjusting The Volume - Sandstrom S1DAB11E Instruction Manual

Basic Operation

Powering ON/OFF

• Press the STANDBY/ON button to switch the unit on.
• Press the STANDBY/ON button again to switch the unit back to standby mode.
• Disconnect the mains plug from the mains socket if you want to switch the unit off
completely.

Selecting Mode

Press the DAB/FM button repeatedly to switch between modes (DAB or FM).

Adjusting the Volume

Adjust the volume to the desired level by turning the VOLUME control.

Setting the Clock

The clock will only set and be updated if you can receive DAB signals in your location.
In order for the clock to synchronise to the current local time you must leave it one DAB
station for a short period. Manual clock setting is not required.

Setting the Alarm time and Wake-up Mode

This radio can be used as a standard "Radio Alarm Clock" in AC operation. You can use the
alarm function to wake you to an electronic buzzer tone or to your favourite radio (DAB/
FM). The alarm can be set in either standby or during operation.
1. Depress and hold the ALARM/SNOOZE button until
the display shows "Alarm Setting".
2. Repeatedly press the
SELECT button to adjust your desired alarm time –
first set the hour and then the minute.
Finally press the SELECT button to confirm. The alarm
3.
time is now set and you will enter into the wake-up
mode settings.
4. Repeatedly press the
the SELECT button to adjust the wake-up mode
settings – first set the DAB Preset (1-10) and the FM
Preset (1-10), then the Buzzer Tone (1 or 2), and finally
the Alarm Volume Level (1-20).
5. After setting the alarm volume level, the wake-up
mode settings are completed. The alarm function is
now ready for you to activate.
Preset the DAB and FM Radio Station prior to setting up.
buttons followed by the
buttons followed by pressing
GB
13