Radio Operation; Auto Scan; Manual Scan; Adjusting The Volume - Sandstrom S1RADB11E Instruction Manual

Radio Operation

Press the MODE button repeatedly to select TUNER mode.

Auto Scan

To search for an FM station, press and hold the
buttons to start the auto scan. Once a
station has been found, the scanning will stop
automatically.

Manual Scan

To search for FM stations manually, press the
reached.
Alternatively, press the VOLUME / TUNE control, then turn it to adjust the frequency.

Adjusting the Volume

Turn the VOLUME / TUNE control to adjust the volume.

Audio Mode

• The unit will automatically switch between stereo and mono mode, when auto mode is
selected but you can override this and switch this function manually by changing it to
mono mode. This is helpful when receiving poor signal reception.
• During stereo reception, the received L/R stereo sound will be automatically combined
into one single channel to suit the single speaker design of this radio.

Presetting Stations

You can store up to 10 of your favourite FM stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to
the station that you would like to save, press the
MEMORY button. The display will show "P#", and
the preset number will flash.
2. Press the +/- buttons to select your desired station
preset number.
Press the MEMORY button to confirm your
3.
station, the display will show "P#".

Recalling a Preset Station

Once you have saved a station, you can recall it by pressing the +/- button, then select your
desired preset number.
TUNER
buttons until your desired station is
GB
17