Basic Operation; Powering On/Off; Selecting Modes; Adjusting The Volume - Sandstrom S2DABB11E Instruction Manual

Basic Operation

Powering ON/OFF

When you first connect the unit to the mains socket, the unit will be in STANDBY mode and
the standby indicator will illuminate.
• Press the STANDBY
• Press the STANDBY
• Disconnect the mains plug from the mains socket if you want to switch the unit off
completely.

Selecting Modes

Press the DAB/FM button repeatedly to switch between modes (DAB or FM).
GB

Adjusting the Volume

Adjust the volume to the desired level by turning the VOLUME +/– control.

Setting the Clock

The clock can only set and be updated if you can receive DAB signals in your location. In
order for the clock to synchronise to the current local time you must leave it on one DAB
station for a short period of time. Manual clock setting is not required.

Setting the Alarm

Make sure you have preset FM and DAB stations before setting the Alarm, if you want to
wake up to DAB or FM radio.
Press and hold the ALARM/SNOOZE button to set the
1.
alarm. The display will show "Alarm Setting" and the
hour digits will flash.
2. Press the
digits and then press the SELECT button to confirm.
3. The minute digits will flash. Press the
repeatedly to adjust the minute digits and then press
the SELECT button to confirm.
4. Press the
the 1-4 DAB preset stations. Press the SELECT button
to confirm.
5. Press the
the 1-4 FM preset stations. Press the SELECT button to
confirm.
6. Press the
Buzzer tone 1 or 2. Press the SELECT button to
confirm.
7. Press the
wake up volume level from 1-20. Press the SELECT
button to confirm.
10
button to switch the unit on.
button to switch the unit back to standby mode.
buttons repeatedly to adjust the hour
buttons repeatedly to select from one of
buttons repeatedly to select from one of
buttons repeatedly to select either
buttons repeatedly to select the radio
buttons