Pre-Installation And Application Warnings - Directechs DS3 Installation Manual

Pre-installation and application warnings

Firmware notes: This section highlights important information for this specific firmware and will assist in pricing
accordingly, as well as bringing awareness to any operational or vehicle limitations.
T-Harness
compatible
Š All connectors are displayed from the wire side (unless specified otherwise).
Š It is important to check that the fuses are positioned correctly in the module. Proper fuse positioning is displayed on each wiring diagram.
Š Refer to the "Vehicle connections" following the installation diagram.
General notes: This section highlights important information for this specific firmware.
The installation of an aftermarket hood pin is ONLY required on vehicles that are NOT equipped with a factory hood pin, or if NOT
[1]
supported in data.
The siren is ONLY required when enabling the security features during module flashing.
[2]
For security-only installations, refer to the "Locating components in the vehicle" section for optional starter disable connection.
[3]
5
933.CHRYSLER 7.34.195.3 2005 Chrysler 300/300c
©2022 VOXX•DEI LLC. All rights reserved.
Keys
1 Keys required
required for
for operation
programming
0