Table of Contents
Advertisement
port attached. In Applicable Hosts, check the IP address/DNS
name of the IIS server.
Connection Alert.
13.
Click
Apply.
14.
Click
Now, you can set the console server to send alerts to the Nagios server.
Lastly you need to add a User for the client running MetaConnect:
Users & Groups from the Serial & Network menu.
1.
Select
Add User.
2.
Click
3.
In Username, enter: sdtnagiosuser, then enter and confirm a Password.
Accessible Hosts click the IP address/DNS name of the IIS server,
4.
In
and in Accessible Ports click the serial port that has the router
console port attached
Apply.
5.
Click
Enable Nagios on the ECS0016
System: Nagios on the ECS0016 Management Console and
1.
Select
select Nagios service Enabled.
2.
Enter the
Nagios Host Name that the ECS0016 gateway will be
referred to in the Nagios central server – this will be generated from
local System Name (entered in System: Administration) if unspecified
3.
In Nagios Host Address enter the IP address or DNS name that the
Instruction Manual
Remote
ECS0016
Gateway
78
Advertisement
Table of Contents
