Table of Contents
Advertisement
Host.
IP Address/DNS Name of the network server, e.g.:
2.
Enter the
192.168.1.10 and enter a Description, e.g.: Windows 2003 IIS Server
3.
Remove all
Terminal Services, so check TCP, Port 3389 and log level 1 then click
Add. It is important to remove and re-add the service to enable logging
4.
Scroll down to
New Check and select Check Ping. Click check-host-alive.
5.
Click
New Check and select Check Permitted TCP. Select Port 3389
6.
Click
New Check and select Check TCP. Select Port 80.
7.
Click
New Check and select Check TCP. Select Port 443
8.
Click
Apply.
9.
Click
Similarly you now must configure the serial port to the router to be moni-
tored by Nagios:
Serial Port from the Serial & Network menu.
1.
Select
2.
Locate the serial port that has the router console port attached and
click Edit.
3.
Ensure the serial port settings under
and match the attached router's console port.
Console Server Mode, and select Logging Level 1.
4.
Click
Telnet (SSH access is not required, as MetaConnect is used
5.
Check
to secure the otherwise insecure Telnet connection).
6.
Scroll down to
Port Log and Serial Status.
7.
Check
8.
Click
Apply
Alerts from the Alerts & Logging menu and click Add Alert.
9.
Select
Description, enter: Administrator connection
10.
In
Nagios (NSCA)
11.
Check
Applicable Ports check the serial port that has the router console
12.
In
Permitted Services. This server will be accessible using
Nagios Settings and check Enable Nagios.
Nagios Settings and check Enable Nagios.
Instruction Manual
Common Settings are correct
77
Advertisement
Table of Contents
