•
Command line PPP and manual configuration (which works with any
Linux distribution)
•
Using the Linuxconf configuration tool (for Red Hat compatible
distributions). This configures the scripts ifup/ifdown to start and stop
a PPP connection
•
Using the Gnome control panel configuration tool
•
WVDIAL and the Redhat "Dialup configuration tool"
•
GUI dial program Xisp. Download/Installation/Configuration
Note For all PPP clients:
•
Set the PPP link up with TCP/IP as the only protocol enabled
•
Specify that the Server will assign IP address and do DNS
•
Do not set up the ECS0016 PPP link as default for Internet connection
Instruction Manual
55