Table of Contents
Advertisement
3.
Select the Serial & Network: RPC Connections menu. This will display
all the RPC connections that have already been configured.
4.
Click Add RPC.
5.
Enter a RPC Name and Description for the RPC.
6.
In "Connected Via" select the pre-configured serial port or the network
host address that connects to the RPC.
7.
Select any specific labels you wish to apply to specific RPC Outlets
(e.g. the PDU may have 20 outlets connected to 20 powered devices
you may wish to identify by name).
Instruction Manual
33
Advertisement
Table of Contents
