Table of Contents
Advertisement
Network Hosts
To access a locally networked computer or appliance (referred to as a
Host) you must identify the network connected Host, then specify the TCP
or UDP ports/services that will be used to control that Host.
Selecting Serial & Network: Network Hosts presents all of the network
connected Hosts that have been enabled for access, as well as the
related access TCP ports/services.
Add Host to enable access to a new Host (or select Edit to up
•
Click
date the settings for existing Host)
IP Address or DNS Name of the new network connected
•
Enter the
Host (and optionally enter a Description)
•
Add or edit the Permitted Services (or TCP/UDP port numbers) that
are authorized to be used in controlling this host. Only these permitted
services will be forwarded through by MetaConnect to the Host. All
other services (TCP/UDP ports) will be blocked.
Select Nagios Enabled if the service on the Host is to be
•
Optional:
monitored using the ECS0016 distributed Nagios monitoring.
Logging Level specifies the level of information to be logged and
•
The
monitored for each Host access.
•
If the Host is a networked server with IPMI power control, then the
Administrator can enable users (Users and Administrators) to remotely
cycle power and reboot.
Click Apply once the desired changes have been made.
Instruction Manual
25
Advertisement
Table of Contents
