Table of Contents
Advertisement
•
To initiate a pre-configured dialup connection under Windows, use the
following Start Command:
cmd /c start "Starting Out of Band Connection" /wait /min rasdial
network_connection login password
(where network_connection is the name of the network connection
as displayed in Control Panel -> Network Connections, login is the
dial-in username, and password is the dial-in password for the
connection)
•
To initiate a pre-configured dialup connection under Linux, use the
following Start Command:
pon network_connection
(where network_connection is the name of the connection)
3.
Enter the command or path to a script to stop the OoB connection
using a Stop Command
•
To stop a preconfigured dialup connection under Windows, use the
following Stop Command:
cmd /c start "Stopping Out of Band Connection" /wait /min rasdial
network_connection /disconnect
(where network connection is the name of the network connection as
displayed in Control Panel -> Network Connections)
•
To stop a preconfigured dialup connection under Linux, use the
following Stop Command:
poff network_connection
Instruction Manual
59
Advertisement
Table of Contents
