Table of Contents
Advertisement
The next step is to Fingerprint each new Slave-Master connection, which
will authenticate you as a legitimate user for the SSH session. On the first
connection the Slave will receive a fingerprint from the Master which will
be used on all future connections.
•
To establish the fingerprint, first log in the Master server as root and
establish an SSH connection to the Slave remote host:
•
Once the SSH connection has been established you will be asked to
accept the key. Answer Yes and the fingerprint will be added to the list
of known hosts.
•
If you are asked to supply a password, then there has been a
problem with uploading keys. The keys should remove any need to
supply a password.
You can now begin setting up the Slaves and configuring Slave serial
ports from the Master console server:
•
Select Serial & Network: Cascaded Ports on the Master's Management
Console. To add clustering support select Add Slave
To define and configure a Slave:
1.
Enter the remote IP Address (or DNS Name) for the Slave console
server
2.
Enter a brief Description and a short Label for the Slave (use a
convention here that enables effective management of large networks
Instruction Manual
# ssh remhost
29
Advertisement
Table of Contents
