Table of Contents
Advertisement
Management Console Connection
The ECS0016 is pre-configured with a default IP Address: 192.168.0.1
and Subnet Mask: 255.255.255.0 .
Directly connect a PC or workstation to the ECS0016. To configure the
ECS0016 with a browser, the connected PC or workstation should have
an IP address in the same range as the ECS0016 (e.g. 192.168.0.100)
Please note: For initial configuration, it is recommended that the
ECS0016 be connected directly to a single PC or workstation. If you
choose to connect your LAN before completing the initial setup steps:
•
Ensure there are
192.168.0.1
•
Ensure the Console Server and the PC/workstation are on the
LAN segment, with no interposed router appliances
To configure the IP Address of your Linux or Unix PC/workstation simply
run ipconfig. For Windows PCs (Win9x/Me/2000/XP/ NT):
Start > Settings, then select Control Panel and double-click
1.
Click
Network Connections (for 95/98/Me, double click Network).
2.
Right-click on
Internet Protocol (TCP/IP) and click Properties.
3.
Select
Use the following IP address and enter the following details:
4.
Select
IP address: 192.168.0.100 Subnet mask: 255.255.255.0.
If you wish to retain your existing IP settings for this network connection,
click Advanced and add the above as a secondary IP connection.
Instruction Manual
no other devices on the LAN with an IP Address of
Local Area Connection and select Properties.
3
same
Advertisement
Table of Contents
