Table of Contents
Advertisement
The Administrator can also edit the Access settings for any existing Us-
ers. To do so:
Serial & Network: Users & Groups
1.
Select
Edit for the User to be modified.
2.
Click
Authentication
For details on authentication, please refer to the section titled Remote
Authentication Configuration.
Please note: There are no limits to the number of Users you can set up,
or on the number of Users per serial port or host. As such, multiple Users
(and the Administrator) can control /monitor the one port or host.
Each User can be a member of a number of Groups, in which case they
take on the cumulative access privileges of each of those Groups. A
User may not be a member of any Groups (however if the User is not
even a member of the default user group, they will not be able to use the
ECS0016 Management Console to manage ports.
Instruction Manual
24
Advertisement
Table of Contents
