Fronius Selectiva 4.0 2100 Operating Instructions Manual page 36

4
Navigate through the configuration menu and its submenus as follows:
1
2
3
4
5
To exit the current menu:
6
1
2
The selection of settings for the "Charging settings" menu item appears:
The display may vary depending on the selection made. If "Pb-WET" has been se-
lected as the type of battery as shown in the illustration - in conjunction with the
36
Confirm the entry with the "Pause/Start" button.
Use the "Up/Down" buttons to select the desired menu item.
Press the "Pause/Start" button to confirm the menu item and confirm any
confirmation prompts (e.g. "OK?") again.
If necessary, use the "Up/Down" buttons to make a selection, e.g. "Off/On" or
enter a value.
Press the "Pause/Start" button to confirm the entry.
If the cursor moves to the next setting or digit after confirming, proceed
again as described in points (3) and (4).
Press the "Menu" button to return to the higher-level selection.
Use the "Up/Down" buttons to select the "Charging settings" menu item.
Press the "Pause/Start" button to confirm the menu item.
The selection of the main menu items
for configuration mode appears.
When selecting a menu item, you may
be prompted to read the Operating In-
structions. Confirm this prompt by
pressing the "Pause/Start" button
again.
The charge settings are explained be-
low by way of an example: