Installation
12
5
Installation
The device can be installed in any position in a vessel, pipe or tank.
1
Temperature spacer for tank with insulation and/or high process temperatures.
5.1
Installation conditions
5.1.1
Switch point
Typical switch points, depending on the orientation of the point level switch (water
+25 °C (+77 °F), 1 bar (14.5 psi).
A
D
A
Installation from above
B
Installation from below
C
Installation from the side
D
Switch point
5.1.2
Take viscosity into consideration
Low viscosity
Low viscosity (< 2 000 mPa·s), e.g. water. The tuning fork can be located in the
installation socket.
1
B
D
Liquiphant FTL51B
C
D
Endress+Hauser
A0037879
A0037915