Usage; Test Procedure; Emergency Stop Switch- Push Button Function (Cut Out); Tilt Sensor Control Box Operation - Haulotte C8 Operator's Manual

Electric scissor lifts
E
- Driving

3 - Usage

N.B.-:-T
HE FUNCTIONS FOR THE ENTIRE RANGE ARE DESCRIBED BELOW
HAVE TO IDENTIFY THE FUNCTION CONTROLS AND INDICATORS
Find all the function indicators and controls in
3.1 -

TEST PROCEDURE

3.1.1 - Emergency stop switch- push button function (cut out)

G r o u n d c o n t r o l b o x e m e r g e n c y s t o p p u s h - b u t t o n
Step
1
2
3
4
P l a t f o r m c o n t r o l b o x e m e r g e n c y s t o p p u s h - b u t t o n
Step
1
2
3
4

3.1.2 - Tilt sensor control box operation

N.B.-:-D
EPENDING ON YOUR MACHINE CONFIGURATION
TO CARRY OUT THIS OPERATION
N.B.-:-W
OPERATOR THAT THE PLATFORM COULD NOT RAISE
REPOSITION MACHINE ON A LEVEL GROUND BEFORE RAISING PLATFORM
24203 3227 0
Pull the emergency stop switch- push buttons (cut-off) 144, 46
Switch the machine on 72 or 92(Depending on the machine).
Turn the ( 72 ) or ( 92 ) control box activation selector key to the right to activate the ground
control box(Depending on the machine). The indicators light up.
Push the emergency stop switch- push button (cut-off) 144. The indicators go out.
Pull the emergency stop switch- push buttons (cut-off) 144, 46
Switch the machine on 72 or 92(Depending on the machine).
Turn the ( 72 ) or ( 92 ) control box activation selection key to the left to activate the platform
control box(Depending on the machine). The indicators light up.
Push the emergency stop switch- push button (cut-off) 46. The indicators go out.
.
1. Pull out the emergency stop switch-push buttons (cut-out) on the upper and lower
control boxes (144, 46).
2. Switch on the machine from lower control box (72) or (92)(Depending on the machine).
3. Locate the tilt sensor next to the ground control box.
4. Manually tilt and maintain the tilt sensor towards the front for a few seconds
( Section C 2- Main components) :
• The buzzer sounds.
• For equipped machines : The slope sensor prevents lifting and driving movements.
ITH THE MACHINE UNFOLDED
E 10 09
.
Section C 5 - Control boxes
Action
Action
,
OUTSIDE ASSISTANCE MAY BE NECESSARY IN ORDER
,
THE TILT SENSOR GIVES AN AUDIBLE SIGNAL INDICATING TO THE
. I
N THIS CASE
. R
EFER TO THE MACHINE MODEL YOU
,
LOWER PLATFORM COMPLETELY
.
EN
A
B
C
D
E
F
G
H
I
,
THEN
73