Komatsu 114E-3 Series Shop Manual page 340

SEN00464-01
46. Removal from engine repair stand
1) Sling engine assembly (1) temporarily and
disconnect it from repair stand A.
4
Engine assembly: Approx. 800 kg
(Weight depends on each applica-
ble machine)
2) Remove tool B.
3) Place and fix engine assembly (1) on sta-
ble engine stand [1].
4) Install plates (3) and (5).
5) Install ground wire (4) of the main control-
ler to plate (3).
32
50 Disassembly and assembly
47. Muffler
1) Install plate (1).
2) Install plate (2) and block (3).
3) Install tube (4).
3
Clamp:
6.9 – 8.8 Nm {0.7 – 0.9 kgm}
4) Install muffler assembly (5).
48. Refilling with oil
1) Check that the engine oil drain plug is
tightened.
2) Add oil through the oil filler to the specified
level.
5
Engine oil pan: Approx. 24 l
114E-3 Series