Komatsu 114E-3 Series Shop Manual page 295

50 Disassembly and assembly
3] Disconnect connector (12), pull out
wiring harness (10), and move con-
nector (12) toward the front of the
engine.
4] Remove pipe nut (13) on the injector
side.
3) Removal of high-pressure pipe (7)
1] Remove clamp (14) and high-pres-
sure pipe (7).
2] Remove stay (15).
13. Common rail
1) Remove the joint bolt of fuel drain tube (1).
2) Remove mounting bolt (3) and common
rail (2).
114E-3 Series
14. Removal of low-pressure hose
k
The internal parts of the adapter may
b e d a m a g e d w h e n t h e h o s e i s
removed. Accordingly, do not reuse the
adapter but use new one when install-
ing the hose again, as a rule.
1) Remove low-pressure hose assembly (1).
2) Remove supply hose (2).
Removal of hose
q
While pressing the adapter (by the
right and left sides) at the hose end,
pry off the hose end face with a
screwdriver.
15. Fuel filter bracket
Remove fuel filter bracket assembly (1).
SEN00463-01
5