Komatsu 114E-3 Series Shop Manual page 323

50 Disassembly and assembly
4) Install suction tube (3).
Set the gasket to the end flange.
q
2
Flange: Gasket sealant (LG-7)
3
Flange mounting bolt:
5) Apply gasket sealant to the basket mating
face (A) of the oil pan.
3
Oil pan: Liquid gasket (LG-7)
a Apply gasket sealant (strings) simi-
larly to step 2).
6) Install oil pan (2) with mounting bolts (1).
114E-3 Series
7.8 ± 2 Nm {0.8 ± 0.2 kgm}
7) Tightening order of bolts
Tighten the bolts in the numerical order
shown below: [1]
3
Mounting bolt:
17. Flywheel housing
1) Install flywheel housing (2) with bolts (1).
a Apply a string of gasket sealant (LG-
7) 1 – 3 mm in diameter to the hous-
ing mounting flange face and around
each mounting bolt hole.
SEN00464-01
→ [32]
24 ± 4 Nm {2.4 ± 0.4 kgm}
15