Komatsu 114E-3 Series Shop Manual page 304

SEN00463-01
3] Remove pin (6) to disconnect piston
(4) and connecting rod (2).
4] Remove the snap ring on the oppo-
site side.
5] Using tool D, remove piston ring (7).
a Keep the piston, connecting rod,
bearing, piston rings, and piston pin
by the cylinders.
35. Flywheel
1) Install lock plate [1] and remove mounting
bolt (1).
14
50 Disassembly and assembly
2) Install eyebolts [2] to flywheel (2) and lift
off the flywheel.
4
Flywheel: 40 kg
36. Flywheel housing
Remove 12 bolts (1) and flywheel housing (2).
37. Rear seal housing
1) Remove seal housing (1).
114E-3 Series