TA Instruments TGA 2950 Operator's Manual page 245

Air
Cool
Line
Figure D.5
Plugging in the
AIR COOL Line
TA I TGA 2950
NSTRUMENTS
TGA 2950 EGA Furnace Option
10. Press the FURNACE key to raise the
furnace carriage until the lower mounting
screws are below the top edge of the en-
larged cutout in the instrument faceplate.
Then press the STOP key.
11. Plug the EGA furnace arm into the connec-
tor on the carriage and tighten the lower two
mounting screws using the 3/32-inch ball
driver supplied with the TGA 2950 EGA.
See Figure D.6 on the next page.
Wire Ties
Water
Cool
Lines
D–11