Table of Contents
Advertisement
Appendix D
Figure D.4
Aligning the Cleats
!
WARNING
D–10
Loosening the upper two mounting screws
any more than one full turn may cause the
screws to interfere with the inside of the
instrument cabinet, causing damage to the
instrument.
9. Plug the AIR COOL line into the base of the
EGA furnace, then connect the two water-
cooling lines, making sure that the lines are
not crossed. See Figure D.5 for the correct
placement of the lines. Be sure to install the
wire ties (supplied in the kit) around the
cooling lines to prevent water leakage.
TA I
TGA 2950
NSTRUMENTS
Advertisement
Table of Contents
