Table of Contents
Advertisement
Status Codes
Table 4.1
Status Codes
TA I
TGA 2950
NSTRUMENTS
Status codes are character strings that are
continuously displayed at the top left of the
TGA instrument display. These codes tell you
what segment in the method is currently being
performed by the instrument.
Code
Meaning
Air Cool
The furnace air cool line
has been opened to cool
the furnace.
Calib
The TGA is in calibration
mode.
Closing
The furnace assembly is
closing.
Cold
The instrument heater
cannot supply heat fast
enough to keep up with
the thermal program. This
may be caused by a large
ballistic jump in the
program, a faulty heater,
or a faulty control thermo-
couple signal.
Complete
The thermal method has
finished.
Status Codes
(table continued)
4–17
Advertisement
Table of Contents
