Symantec NetBackup Manual page 88

88 Configuring OpenStorage
Setting the Nirvanix storage server properties
LOG_CURL
CURL_CONNECT_TIMEOUT
CURL_TIMEOUT
RESTRICT_IP
PROXY_TYPE
PROXY_IP
PROXY_PORT
KMS_SERVER
KMS_VERSION
Whether to log cURL activity. The default is 0, do not log activity.
NetBackup uses the cURL library to manage data transfer to the Nirvanix cloud.
The maximum time in seconds that the media server tries to connect to the Nirvanix
storage server. This only limits the connection phase, not the session time.
The default is 300 seconds (five minutes). The media server attempts to connect up
to three times.
To disable this timeout, set the value to 0 (zero).
NetBackup uses the cURL library to manage data transfer to the Nirvanix cloud.
The maximum time in seconds to allow for the completion of a data operation. If the
operation does not complete in the specified time, the operation fails.
The default is 900 seconds (15 minutes). The media server attempts the operation up
to three times.
To disable this timeout, set the value to 0 (zero).
NetBackup uses the cURL library to manage data transfer to the Nirvanix cloud.
Determines if multiple hosts can upload and download using the same
upload-download token, as follows:
If RESTRICT_IP is set to YES, only one host can use an upload-download token.
By default, RESTRICT_IP is set to YES. This setting prevents any intrusions into
the session by any other host.
If RESTRICT_IP is set to NO, multiple host addresses can upload and download
using the same token.
If the host's IP address changes, this setting allows the host to continue with the
session. A host IP address my change because of network address translation
(NAT) or proxies. Therefore, set RESTRICT_IP to NO for such environments.
If firewalls prevent access to the nirvanix.comdomain on ports 80 (HTTP) or 443
(HTTPS), you can use a proxy server. Valid values are either HTTP or SOCKS. If you
do not use a proxy server, leave this field blank.
The IP address of the proxy server. If you do not use a proxy server, leave this field
blank.
If you use a proxy server, the port number to use to connect to the proxy server. If
you do not use a proxy server, leave this field blank.
The NetBackup server that hosts the KMS service. When you set the Nirvanix storage
server properties, enter the name of the KMS server host.
By default, this field contains the NetBackup master server name.
The version of the NetBackup Key Management Service.