Adding Volumes To An Advanceddisk Disk Pool; Changing Advanceddisk Disk Pool Properties - Symantec NetBackup Manual

Adding volumes to an AdvancedDisk disk pool

Changing AdvancedDisk disk pool properties

See Changing AdvancedDisk disk pool state"
See Changing AdvancedDisk disk volume state"
See Deleting an AdvancedDisk disk pool"
See Determining AdvancedDisk disk pool state"
See Determining AdvancedDisk disk volume state"
See Merging AdvancedDisk disk pools"
See Removing a volume from an AdvancedDisk disk pool"
See Viewing AdvancedDisk disk pools"
You can expand a disk pool's capacity by adding disk volumes to the disk pool.
The names of the new volumes must differ from the names of the volumes in the
current disk pool.
The NetBackup storage units that use the disk pool use the additional storage
capacity automatically. You do not have to change the storage units.
(By default, NetBackup automatically increases disk pool capacity if the capacity
of the underlying disk volumes increases. Similarly, NetBackup decreases the
capacity of a disk pool if the underlying disk volume capacity decreases.)
Add volumes process for an AdvancedDisk disk pool
Table 5-1
Task
Create a disk pool from the new
disk volumes on the storage
server.
Merge the disk pools.
You can change the properties of a disk pool.
To add volumes to a disk pool, you must use a different procedure.
See Adding volumes to an AdvancedDisk disk pool"
Managing AdvancedDisk disk pools
on page 42.
on page 43.
on page 43.
on page 44.
on page 44.
on page 45.
on page 46.
Procedure
See Configuring an AdvancedDisk disk pool"
on page 29.
When you merge the disk pools, specify the original
disk pool as the primary one. NetBackup deletes the
secondary disk pool after the merge.
See Merging AdvancedDisk disk pools"
on page 41.
Managing AdvancedDisk
on page 45.
on page 45.
41