Symantec NetBackup Manual page 28

28 Configuring AdvancedDisk
Configuring an AdvancedDisk storage server
Options to configure AdvancedDisk storage server
Table 4-3
Option Description
The name of the NetBackup media server that has a file system
-storage_server
mount on the storage.
storage_server
-stype hostname Use AdvancedDisk.
-st storage_type A numeric value that specifies the storage server properties. For
AdvancedDisk, the default is 5 (direct attached, formatted disk).
Required only if you want to use a value other than the default.
Determine the value by adding together the numeric values of the
following properties:
Whether the disk is formatted and how it is attached are mutually
exclusive and complementary.
Use the same name as the storage server name.
-media_server
hostname
An attribute to apply to the storage server for the read side of restore
-setattribute
or duplication operations. The following are the attributes:
attribute
See
on page 24.
1 - formatted disk. The disk is formatted as part of the
vendor-specific preparation; NetBackup does not format the
disk.
2 - raw disk. The disk is not formatted; NetBackup formats the
disk.
4 - direct attached. Direct-attached means that the storage server
and media server are the same NetBackup host.
8 - network attached. Network-attached means that the storage
server is physically distinct from the NetBackup media server.
It does not imply LAN data movement nor does it preclude Fibre
Channel as the transport for data movement.
PrefRestore. The storage server is preferred for the read side
of restore operations. More than one storage server can have
the PrefRestore attribute.
ReqRestore. The storage server is required for the read side of
restore operations. More than one storage server can have the
ReqRestore attribute.
ReqDuplicate. The storage server is required for the read side
of duplication operations. More than one storage server can have
the ReqDuplicate attribute.
About AdvancedDisk preferred or required read servers"