Removing An Advanceddisk Storage Server From Disk Pool Access - Symantec NetBackup Manual

Removing an AdvancedDisk storage server from disk pool access

To remove AdvancedDisk storage server attributes
Run the following command on the NetBackup master server or on a storage
server:
nbdevconfig -changests -storage_server storage_server -stype
AdvancedDisk -clearattribute attribute
The following is the path to the
UNIX: /usr/openv/netbackup/bin/admincmd
Windows: install_path\NetBackup\bin\admincmd
Use the
nbdevconfig
can access a disk pool. If NetBackup jobs exist that use that storage server, you
cannot remove the storage server.
Warning: If you remove the only storage server, data may be lost. NetBackup
cannot access the disk pool and the backup images on the disk pool.
To remove an AdvancedDisk storage server from disk pool access
1 For every storage unit that specifies the storage server (media server) in Use
one of the following media servers, clear the check box that specifies the
media server.
This step is not required if the storage unit is configured to use any available
media server.
2
If only one storage server exists, change the state of all disk pools on the
array to DOWN. To do so, use the following command:
nbdevconfig -changestate -stype AdvancedDisk -dp disk_pool_name
-state DOWN
The following is the path to the
UNIX: /usr/openv/netbackup/bin/admincmd
Windows: install_path\NetBackup\bin\admincmd
3 Remove the storage server. The following is the command syntax:
nbdevconfig -changedp -stype AdvancedDisk -dp disk_pool_name
-del_storage_servers storage_server
nbdevconfig
command to remove a storage server so that it no longer
nbdevconfig
Managing AdvancedDisk
Managing AdvancedDisk storage servers
command:
command:
39