Viewing Advanceddisk Storage Servers; Viewing Advanceddisk Storage Server Attributes; Managing Advanceddisk Disk Pools - Symantec NetBackup Manual

40 Managing AdvancedDisk

Managing AdvancedDisk disk pools

Viewing AdvancedDisk storage servers

Viewing AdvancedDisk storage server attributes

Managing AdvancedDisk disk pools
Use the NetBackup Administration Console to view a list of storage servers
already configured.
To view AdvancedDisk storage servers
In the NetBackup Administration Console, in the left pane, expand Media
and Device Management > Credentials > Storage Server.
The right pane, labeled All Storage Servers , shows all configured storage
servers. AdvancedDisk storage servers show AdvancedDisk in the Disk Type
column.
Use the NetBackup
nbdevquery
To view AdvancedDisk storage server attributes
Run the following command on the NetBackup master server or a storage
server:
nbdevquery -liststs -storage_server storage_server -stype
AdvancedDisk –U
The following is the path to the
UNIX: /usr/openv/netbackup/bin/admincmd
Windows: install_path\NetBackup\bin\admincmd
The following is example output:
Storage Server
Storage Server Type : AdvancedDisk
Storage Type
State
Flag
This example output is shortened; more flags may appear in actual output.
After you configure AdvancedDisk, you can perform various tasks to manage your
AdvancedDisk disk pools.
See Adding volumes to an AdvancedDisk disk pool"
See Changing AdvancedDisk disk pool properties"
command to view the storage server attributes.
nbdevconfig
: advdsk_server.symantecs.com
: Formatted Disk, Direct Attached
: UP
: PrefRestore
command:
on page 41.
on page 41.