Advanceddisk Storage Server Options - Symantec NetBackup Manual

AdvancedDisk storage server options

Use the Storage Server Configuration Wizard to configure a storage server.
However, if you want to configure preferred or required attributes, use the
command.
nbdevconfig
You can configure multiple storage servers. If you do, you must run the wizard
for each storage server you want to configure. You must configure as storage
servers the NetBackup media servers that have read and write access to the storage.
See About AdvancedDisk storage servers"
When you configure a storage server, it also is configured as a data mover.
See About AdvancedDisk data movers"
See About AdvancedDisk preferred or required read servers"
To configure an AdvancedDisk storage server by using the wizard
1 Determine if the storage server is configured already.
See Viewing AdvancedDisk storage servers"
2 In the NetBackup Administration Console, in the left pane, expand Media
and Device Management > Configure Disk Storage Servers.
3 Follow the wizard screens to configure a storage server.
To configure an AdvancedDisk storage server with attributes
1 Determine if the storage server is configured already.
See Viewing AdvancedDisk storage servers"
2
Run the following command on the NetBackup master server or the media
server:
nbdevconfig -creatests -storage_server hostname -stype
AdvancedDisk [-st storage_type] -media_server hostname
[-setattribute attribute]
The following is the path to the
UNIX: /usr/openv/netbackup/bin/admincmd
Windows: install_path\NetBackup\bin\admincmd
See AdvancedDisk storage server options"
The following are the
storage servers.
Configuring an AdvancedDisk storage server
on page 23.
nbdevconfig
command options that are used to configure
nbdevconfig
Configuring AdvancedDisk
on page 23.
on page 24.
on page 40.
on page 40.
command:
on page 27.
27