Changing Openstorage Disk Pool Properties - Symantec NetBackup Manual

114 Managing OpenStorage
Managing OpenStorage disk pools

Changing OpenStorage disk pool properties

Add volumes process for OpenStorage disk pool
Table 12-3
Task
Configure a disk pool from the new disk
volumes on the storage server.
Merge the disk pools.
When you merge the disk pools, specify the
original disk pool as the primary one.
NetBackup deletes the secondary disk pool
after the merge.
You can change the properties of a disk pool.
To add volumes to a disk pool, you must use a different procedure.
See Adding volumes to an OpenStorage disk pool"
To change OpenStorage disk pool properties
1 In the NetBackup Administration Console, in the left pane, expand Media
and Device Management > Devices > Disk Pools.
2
In the right pane, select the disk pool you want to change.
Procedure
See Configuring an OpenStorage disk pool"
on page 89.
See Merging OpenStorage disk pools"
on page 118.
on page 113.