Table of Contents
Advertisement
AT-10 plus
3.2
Service Handbook
Selecting menu options using the arrow keys
Selecting menu options using the arrow
keys
When any of the setting keys are pressed (ECG, Exercise, NIBP, Menu etc.), menu
tabs are displayed and menu options displayed, as given in the ECG example below.
The general principal of navigating and option selection is the same for all menu keys
as follows:
1.
Press the left /right keys to select (highlight) the tab on the top of the screen.
2.
Use the up/down keys to select the field/icon - the entry field appears blue (as
shown in the example below for 'signals').
HR Variability Autom. Format
Lead Test
Pacemaker
Lead Sequence
Signals
Auto-Centring
Rhythm lead group
Left posterior (V4 - V9)
3.
Press Confirm to select.
4.
Use up/down keys to toggle through the options available.
5.
Press Confirm to set.
• When all entries are made, press the Esc key to exit and register the entered data.
Operation Overview
Prog. Leads
Lead
Filter
General
Interpretation
Rhythm Rec
Late Potential
Standard
simultaneous
sequential
NO
NO
3
3.2
Page 19
Advertisement
Table of Contents
