Colour; Test - Schiller AT-10 plus Service Handbook

4 Service Screen
4.7

Colour

Page 24
4.7 Colour
Service
Character Colour
ECG NIBP
Palette :
In this screen the default background colour can be selected. Choose between:
• Cyan
• Grey
• Blank
• Blue
To set the background colour proceed as follows:
1. Set the colour.
2. Press the Escape key.
3. Press the Menu key and select the Software tab.
4. In the software screen click the Save as Default icon (see page 31).
5. Switch the unit off and on again. The defined setting is displayed.
The ECG display can also be inverted. This is carried out in the ECG menu:
• ECG key > General > 'In. ECG Monitor'.
4.8

Test

Service
Character Colour
ECG NIBP
In this screen some test and check functions can be performed as follows:
• Battery capacity test
• Print quality and print alignment check
Test Battery
Spiro HW-Config. I/O + ports
Cyan
Test Battery
Spiro HW-Config. I/O + ports
Software
Software
AT-10 plus