Technical Data; System - Schiller AT-10 plus Service Handbook

9

Technical Data

9.1

System

Dimensions
Monitor
Power supply
Mains Voltage
Power consumption
Battery
Battery
Capacity
Battery Life
Recharging time
Printer
Frequency range
Chart paper
Chart print-out speed
Sensitivity
Recording tracks
Interfaces
Memory
Environmental conditions
Operating temperature,
Storage temperature,
Relative humidity
Pressure during operation
Page 60
9 Technical Data
9.1 System
348 x 288 x 87 mm, approx. 4.2 kg.
• Backlit for graphic and LCD alphanumeric representation
• Resolution: 800 x 600 dots
• 220 - 240 V (nominal), 50 / 60 Hz; 100 - 115 V (nominal), 50 / 60 Hz;
• 14VA to 28VA (Max)
• Operation with built-in rechargeable battery
Nickle Cadnium 9.6 V
• 2 hours normal use, 3 hours Standby
• Under normal operating conditions, 4 years
• 90 %: approx. 7 hours, 100 %: approx. 15 hours
High-resolution thermal printing, 8 dots/mm (amplitude axis), 40 dots/mm (time ax-
is), @ 25 mm/s
• 0.05 ... 150 Hz (IEC/AHA)
• Thermo reactive, Z-fold, 14 x 21 cm (DIN A4; letter size)
• 5/12.5/25/50 mm/s (manual print)
• 5/10/20 mm/ms (manual print)
• 3 to 12 channels, positioned optimally on 200 mm, automatic baseline adjustment
• RS-232 connector for Treadmill
• RS-232 connector for Ergometer
• RS232 connector for pneuotach sensor
• VGA connector for external monitor
• ECG cable Interface
• DC input - 0.5V/cm
• DC output - 0.5V/cm
• Further interface options with the Communications Module
Storage for up to 40 ECG recordings. Further memory available with the extended
memory option.
• 10 ... 40 °C
• -10 ... 50 °C
• 25 ... 95 % (no condensation)
• 700 ... 1060 hPa
AT-10 plus