Table of Contents
Advertisement
CVS-872D
Chapter 2 Adjustment
2.1 Setup of transducer
The frequency and beam angle etc. per
transducer will be conformed to those of the
transducer to be used, then, the correct
information can be provided.
2.1.1 Setup of type of transducer
TD Setting – HF TD Type
TD Setting – LF TD Type
Select the type of transducer to be actually used.
Be adjusted as it has influence on images.
1. Press
.
2. Select [TD Setting] - [XF TD Type].
3. Press of [
] of
The setup box of [XF TD Type] will be
displayed.
4. Press [▲] and [▼] to select TD type of XF.
When a Broadband transducer is used, select
[Broadband Type]. When the other transducer
is used, select [Others]. When transducer is
not used, select [OFF].
0092607062-01
.
5. Press of [►] of
When [Broadband Type] is selected, the
setup box of [Broadband Type] will be
displayed.
6. Press [▲] or [▼] to select the type of
transducer to use.
When [Others] is selected, the setup box of
[Others] will be displayed.
7. Press [▲] or [▼] to select the type of
transducer to use.
8. Press
key.
The setup box [TD selection] will be displayed.
9. Press [▲] or [▼] to select [YES].
10. Press
key.
Chapter 2 Adjustment
.
2-1
Advertisement
Table of Contents
