Table of Contents
Advertisement
CVS-872D
When one of [CM1] to [CM6] is selected,
the set values commonly used at each CM
such as selected language and units will
not be initialized.
When [System ALL] is selected, all setup
values including the values commonly
used at each CM will be initialized.
5. Press [ ].
The setup box of [CM Initialize] will be
displayed.
6. When initialization is performed, select
[Yes] for initialization by pressing [▲] and
[▼] keys, and [No] for not to initialize.
7. Press
.
At [Yes], initialization will be performed.
At [No], the menu will be closed.
Caution: When [System All] is
selected, the display will be in
English after initialization.
3.4.4
Update of program
This is used for program update.
(Please consult your sales agent)
1. Press
.
2. Select [Maintain] – [System Program
Load].
3. Press [ ] of
The setup box of [System Program Load]
will be displayed.
4. When program is to be updated, select
[Yes] and is not to be updated, select [No]
with [▲] and [▼] keys.
5. Press
.
When [Yes] is selected, program will be in
updating
condition
"Updating
Do not Power Off." will be displayed.
When [No] is selected, returns to the
menu.
6. The program will be downloaded from
0092607062-01
.
and
a
message
Chapter 3 Maintenance
USB ROM writer or PC.
When downloading has started, [CM]
keys will blink red in the order of CM1 to
CM6.
At completion of downloading, the both
gain knobs will be lighted red.
7. Pressed
for about 5 seconds to
switch off the power.
Caution: When program updating
failed on the way, switch off the
power once and switch on again. It
will start up in the wait status of
downloading. Try again the
procedures from step 6 again.
3-5
Advertisement
Table of Contents
