Table of Contents
Advertisement
CVS-872D
Chapter 1 Installation
1.3.2
Precautions regarding transducer installation
Cut a PF1 1/2 pipe parallel screw (P = 2.3091) in the 1 1/2 inch pipe, screw in the transducer,
and fix it with the lock bolt.
Attach the pipe receiving bracket and tightening bracket to the ship's side so that this bolt can
be moved up and down and removed.
Raise the pipe above sea level to avoid water pressure during the voyage. When using it,
lower it as deeply as possible so that it is not affected by air bubbles.
During use, fix the front and back of transducer with a rope so as not to turn by water
pressure.
Cable protective cap
Pipe fixing bracket
Pipe tightening bracket
Pipe SGP-1 1/2
Rope
Pipe receiving bracket
BOW
TD
Fig.1.6 TD ship side installation diagram
0092607062-01
1-7
Advertisement
Table of Contents
