Table of Contents
Advertisement
Chapter 2 Adjustment
The following message is displayed and the
TD is set.
.
It is processing.
Please wait a while.
It will return to TD Setting – XF TD Type in a
few seconds.
The TD selected in [Broadband Type] is also
set in both [Broadband Type] high frequency
and low frequency.
The [Frequency], [TX power], and [Beam
Angle] of the selected TD are set
automatically.
The [Frequency], [TX power], and [Beam
Angle] of the TD selected in [TD-XXX] of
[Others] are also set automatically.
When the name of TD to use is unknown,
select [Others (1 Frequency)] or [Others (2
Frequency)].
Select [Others (1 Frequency)] when using a
single frequency TD.
Select [Others (2 Frequency)] when using the
2-frequency alternating transmission TD.
Caution:
When [Others (1 Frequency)] or
[Others (2 Frequency)] is
selected, [Spc. Adj.] - [Output limit
XF] is set to "70" (2kw
equivalency).
After this setting, set it according
to the TX power of the TD to use.
For details on the settings,
refer to "2.6 Setup of Output Limit
for transducer".
2.2 Setup of frequency and
beam angle
TD Setting – HF TD1 setting
TD Setting – HF TD2 setting
TD Setting – LF TD1 setting
TD Setting – LF TD2 setting
1. Press
.
2. Select [TD Setting] - [XF TDX Setting]
3. Press [ ] of
2-2
.
The setup box of [XF TDX Setting] will be
displayed.
4. Select [Frequency] for changing of frequency,
and [Beam angle] for changing of beam angle
with [▲] and [▼] keys.
5. Press [ ].
When [Frequency] is selected, the setup box
of frequency will be displayed.
When [Beam Angle] is selected, the setup
box of beam angle will be displayed.
6. Setup frequency or beam angle with [▲] and
[▼] keys.
When [Broadband Type] is selected in 2.1.1,
beam angle will be automatically set at setup
of frequency.
7. Press
to close the menu.
Caution: The setup of beam angle is
reflected on the display of
detecting range and will not
change the actual beam angle.
(As for beam angle, refer to [Type
of transducer] in Configuration of
Equipment)
CVS-872D
0092607062-01
Advertisement
Table of Contents
