CVS-128 SUPPLEMENT AND CHANGE OF THE OPERATION MANUAL Contents Each chapter number stays the same as the original version. * Additional functions. System Configuration ....... 1 Configuration of Equipment ..... 2 1.2 Power On/Off........4 Power on ..........4 1.12 Display of fish information....4 *Fish symbol detection adjustment..
CVS-128 SUPPLEMENT AND CHANGE OF THE OPERATION MANUAL System Configuration Legend Connection Diagram CVS-128 Display unit Standard configuration With mounting bracket and hard cover Option Prepared by a user To External monitor connector (J7 connector) External monitor (Prepared by a user)
SUPPLEMENT AND CHANGE OF THE OPERATION MANUAL CVS-128 Configuration of Equipment Standard Equipment Configuration List Weight/ Name of item Type Remark Quantity Length Display unit 600 W/1 kW output CVS-128 with mounting bracket 3.2 kg and knob Hard cover E57MB11060...
Page 5
CVS-128 SUPPLEMENT AND CHANGE OF THE OPERATION MANUAL Type of transducer Specification Frequency Material / Mounting method Beam width Length of (Right and left x the cable back and forth) TD-500T-2B 50kHz Plastic Inner-hull 50/200 kHz 50°x50° ( -6dB) 600 W 200kHz 17°x17°...
SUPPLEMENT AND CHANGE OF THE OPERATION MANUAL CVS-128 1.2 Power On/Off Press the [MENU] key to decide the language and the inner-hull. After a few seconds, the menu sets the Power on screen as selected in [DISP]. Press the [BRILL ] key to power on.
CVS-128 SUPPLEMENT AND CHANGE OF THE OPERATION MANUAL Caution: For Thru-hull installation, adjust Select the [Scale type]. (Press the [ ] key between 1 and 4. For Inner-hull or [ ] key) installations, adjust between 3 and 6. Press the [MENU] key to close the menu.
SUPPLEMENT AND CHANGE OF THE OPERATION MANUAL CVS-128 EXAMPLE: 3.6 Setting of Adjust2 Item When the yellow value is change from 60 to 80 in the setting, the Rainbow pattern becomes as shown below. Prev STC strength H In out...
CVS-128 SUPPLEMENT AND CHANGE OF THE OPERATION MANUAL 5.4 Wiring Pin Assignment of Rear Connector Pin assignment viewed from the rear of CVS-128 Display unit. POWER Speed sensor input Sona-tone R Sona-tone L Speed sensor power (+) Power + Transducer input output...
SUPPLEMENT AND CHANGE OF THE OPERATION MANUAL CVS-128 6.1 Menu List The factory set value is shown by the bold and underline. [Disp] key NAV1, Normal (H), Zoom (H), Dual freq, Zoom (L), Normal (L), NAV2 Disp 【▲RANGE▼】key Auto range, 5.0, 10.0, 20.0, 50.0, 100, 160, 300, 500, Auto shift...
Page 11
CVS-128 SUPPLEMENT AND CHANGE OF THE OPERATION MANUAL [MENU] key Image speed (Speed1, Speed2, Speed3, Speed4, Stop, Speed5 (1/1), Speed6, Speed7, Adjust Speed8, Speed9) IR (OFF, Weak, Strong) Color rejection (0 to 50 %: 0%) Noise rejection (0 to 10: 0)
Page 12
SUPPLEMENT AND CHANGE OF THE OPERATION MANUAL CVS-128 Alarm 1 Bottom alarm (OFF, ON) Upper depth (0 to 800 m: 5 m) Lower depth (1 to 800 m: 50 m) Fish alarm (OFF, ON) Position (0 to 800 m: 5 m)
Page 13
Range&Speed unit (NM, kn, km, km/h) Depth unit (m, fm, I.fm, ft) Temperature unit (°C, °F) Localtime offset (- 11.0 to 14.0: 0.0) GPS select (Others, KODEN GPS) GPS initialize (No, Yes) Maintain Simulation (OFF, ON) Slideshow (OFF, 15, 30)
Need help?
Do you have a question about the CVS-128 and is the answer not in the manual?
Questions and answers