Initial Power On Settings; Initializing The Label Printer; To Initialize The Label Printer; Troubleshooting - Casio KL-70E User Manual

3. Remove the tape cartridge.
4. Use a cotton swab dipped in alcohol to clean
the printer head and roller as shown in the illus-
tration.
5. Replace the tape cartridge and close the back cover.

Initial Power On Settings

The following are the initial settings of the Label Printer whenever you turn it
power on.
Item
SIZE
EFFECT
MIRROR
M-FEED
6mm

Initializing the Label Printer

If you experience serious malfunction of the Label Printer or if operation fails
completely, try performing the following operation to initialize the printer.
Important!
• Initializing the Label Printer deletes all memory contents. Make sure you have
a back-up copy of text stored in memory if you need it.
Printer head
Roller
Power On
JUST (2×2)
CANCEL
OFF
NO
OFF

To initialize the Label Printer

1. Turn power off.
2. While holding down the PRINT and ESC keys,
press ON to turn power on.
3. Keeping PRINT and ESC held down, release
the ON key only.
• This prompt confirms whether or not you want to
initialize the Label Printer.
4. Press SET to initialize the Label Printer or ESC to abort the reset operation.
• The following table shows the initial settings.
Item
Display
Memory
SYMBOL
EFFECT
M-FEED
MIRROR
MEMO
DENSITY
6mm
CURRENCY B
FORMAT
ROUND

Troubleshooting

• • • • • Power Supply
Nothing appears on the display.
Possible Cause
Low batteries Replace batteries.
Batteries loaded incor- Remove batteries and reload them correctly.
rectly
AC adaptor is not con- Make sure the AC adaptor is connected cor-
nected correctly. rectly.
INT?
Reset
Cleared
Cleared
,
CANCEL
NO
OFF
STR?
3
OFF
1
2
Action
E-19