Part 13 Reference; Cleaning The Printer Head And Roller; To Clean The Printer Head And Roller; Initial Settings - Casio KL-C500 User Manual

Part 13 Reference

This section contains information about the label printer that you can use as
reference when you need it.

Cleaning the Printer Head and Roller

A dirty printer head and roller can result in poor printing quality. If you have
problems with print quality, use the following procedure to clean the printer head
and roller.

To clean the printer head and roller

1. Make sure the label printer is turned off.
2. Press the tape cartridge compartment cover release and open the compart-
ment cover.
3. Remove the tape cartridge.
4. Use a cotton swab dipped in alcohol to clean the printer head and roller as
shown in the illustration.
Printer head
5. Replace the tape cartridge and close the compartment cover.

Initial Settings

The following are the initial settings of the label printer whenever you turn it
power on or reset the unit.
Item
Display
Memory
ab(CAPS OFF)/AB(CAPS ON)
* Pressing SET when the message "PRESS [SET] TO RECALL" appears on the display,
recalls the text that was on the screen when you last turned off power.
Roller
Power On Reset
Cleared* Cleared
Retained Cleared
Retained ab
Item
Horz/Vert
Text Alignment
Character Pitch
Block Length
Mirror Printing
Proportional Spacing
Block Spacing
Auto Feed
Tape Length
Default Font
Insert/Overwrite
Contrast (32 levels)
Density (5 levels)
Sound
Language
Character Attributes
Fonts
Character Styles
Text Effects
Character Sizes:
(SIZE 9-119pt)
(LINE:FORMAT MENU)
cm/inch
Power On Reset
Horizontal Horizontal
Left Left
8/8 8/8
Auto Auto
Normal Normal
On On
Narrow Narrow
Long Long
Auto Auto
Retained Sans-Serif
Retained Insert
Retained Level 15
Retained Level 3
Retained On
Retained English
Default font Sans-Serif
Normal Normal
None None
Auto sizing Auto sizing
Canceled Canceled
Retained cm
E-39