Table of Contents
Advertisement
Turning Power On and Off
Use the procedures below to turn power on or off.
■ ■ To turn on power
Press
. This will turn on power and cause the power lamp to light green.
• Before turning on power, connect the supplied AC adaptor and power cord to the
printer. For information about connections, refer to steps 2 through 4 under
"Connecting with a USB Cable (Computer Only)"
■ ■ To turn off power
Press
. This will turn off power and cause the power lamp to go out.
Sleep State (Network Standby)
If the printer is connected to a computer over a USB or wireless LAN connection, it will
automatically enter a sleep state after about six minutes of non-operation. This will cause
the power lamp color to change from green to orange. This indicates that the printer is in
network standby.
When a print operation is executed on the computer, the printer will automatically recover
and start printing.
• Auto Power off does not work while the printer is in network standby.
Auto Power Off
If the printer is not connected to a computer over a USB or wireless LAN connection,
Auto Power Off will turn off printer power after about six minutes of non operation.
When you need to use the printer again, press
(page
21)
.
15
Advertisement
Table of Contents
