Vivo MOUNT-PC01 Instruction Manual
Black under desk and wall pc mount
Hide thumbs
Also See for MOUNT-PC01:
- Instruction manual (8 pages) ,
- Instruction manual (5 pages) ,
- Assembly manual (20 pages)
Table of Contents
Advertisement
Quick Links
Black Under Desk and Wall PC Mount
Instruction Manual
SKU: MOUNT-PC01
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-pc01
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vivo MOUNT-PC01
Summary of Contents for Vivo MOUNT-PC01
- Page 1 Black Under Desk and Wall PC Mount Instruction Manual SKU: MOUNT-PC01 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-pc01 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
- Page 2 DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO MOUNT. We include mounting for brick and concrete If unsure, please contact us at vivo-us.com, email at help@vivo-us.com, or call us at 309-278-5303. WARNING: CHOKING HAZARD SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS.
- Page 3 ASSEMBLY STEPS STEP 1 Apply Pads (B) to top, bottom, and side of Mount (A) as shown. STEP 2A-1 OPTION A: Under Desk Installation Secure Mount (A) to bottom of desk using ST4.8x16mm Screws (M-A) and Washers (M-D).
- Page 4 STEP 2A-2 OPTION A: Under Desk Installation Loosen two screws on top of Mount (A) (one on each side) and slide side support bracket out to maximum width. The screws can be removed to adjust the side support bracket to one of two positions, a or b.
- Page 5 STEP 2B-1 OPTION B: Wood Wall Installation Loosen two screws on top of Mount (A) (one on each side) and slide side support bracket out to maximum width. Loosen set screws for lower support using 5mm Allen Wrench (T-A) and slide the support down.
- Page 6 STEP 2B-2B OPTION C: Concrete Wall Installation For concrete wall installation, place Mount (A) against the wall and mark locations with a pencil. Drill 1.2” (35mm) deep holes at marked locations using a 1/4” (6mm) drill bit. Insert Concrete Anchors (M-C) into holes, and insert two ST4.8x38mm Screws (M-B) into top holes, leaving 3mm if thread exposed.
- Page 7 STEP 2B-3 OPTION C: Concrete Wall Installation Place PC tower on Mount (A), slide bottom support up until mount is fit vertically to PC, and tighten set screws using 4mm Allen Wrench (T-A). Slide side bracket into place to hold PC, and tighten screws using a Phillips screwdriver.
- Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the MOUNT-PC01 and is the answer not in the manual?
Questions and answers