Table of Contents
Advertisement
Quick Links
White Projector Ceiling Mount
Instruction Manual
SKU: MOUNT-VP02W
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-vp02w
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Related Manuals for Vivo MOUNT-VP02W
Summary of Contents for Vivo MOUNT-VP02W
- Page 1 White Projector Ceiling Mount Instruction Manual SKU: MOUNT-VP02W Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-vp02w GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
- Page 2 NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED CAUTION! DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR CEILING CONSTRUCTION. USE WOOD STUDS TO MOUNT. We include mounting for brick and concrete. If unsure, please contact us at vivo-us.com, email at help@vivo-us.com, or call us at 309-278-5303.
- Page 3 TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 30lbs Failure to do so may result in serious injury. (13.61kg) Phillips Drill Screwdriver ASSEMBLY STEPS STEP 1 OPTION A: Run cables through arm (A). OPTION B: If running cables through ceiling, pull cables through top plate of arm (A).
- Page 4 STEP 2 OPTION A: Drywall Mounting Use top plate of arm (A) to mark mounting holes on ceiling. Using a 3/16” drill bit, drill approximately 2.2” into ceiling stud. Put arm (A) in place and mount to the pre-drilled holes using bolts (W-A) and washers (W-C) as shown in diagram.
- Page 5 STEP 2 (Continued) OPTION B: Concrete/Brick Mounting Use top plate of arm (A) to mark mounting holes on ceiling. Using a ⅜” drill bit, drill approximately 2.4” into ceiling. Use concrete anchors (W-B), bolts (W-A), and washers (W-C) to mount the arm (A) as shown in diagram.
- Page 6 STEP 3 Mount bracket (B) to arm (A) using spacers (M-L), plates (M-M), bolts (M-I), and washers (M-J, M-K). Tighten using allen key (M-N). STEP 4 Adjust arms of the bracket (C) to fit the mounting holes of your projector. Use bolts (M-A, M-B, M-C, M-D) and washers (M-E, M-F, M-G, M-H) depending on the size of mounting holes in your projector.
- Page 7 STEP 5 Hook the mount (B) to bolts in bottom of mount (A). Secure using bolts (M-I) and washers (M-J, M-K) as shown in diagram. Tighten using allen key (M-N). STEP 6 Adjust height and tilt of mount using allen key (M-N). -15°...
- Page 8 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the MOUNT-VP02W and is the answer not in the manual?
Questions and answers