3.2
AMI BIOS Setup
AMI BIOS ROM has a built-in Setup program that allows users to modify the basic
system configuration. This type of information is stored in battery-backed CMOS RAM
and BIOS NVRAM so that it retains the Setup information when the power is turned off.
Entering Setup
Power on the computer and press <Del>or <ESC> immediately. This will allow you to
enter Setup.
Main – Date and time can be set here. Press <Tab> to switch between date elements
Advanced – Access advanced hardware settings and options
Chipset – Chipset Host Bridge settings and options
Security – Set setup administrator password.
Boot – Boot options including BBS priority and Quiet Boot
Save & Exit –Save your changes and exit the program
Chapter 3 – AMI BIOS Setup
60