Power Management - Aaeon GENE-APL6 User Manual

3.4.8 Powe r Management
Op tions Summary
Po wer Mode
Select system power mode
Po wer Saving (ERP)
Co ntrol
Configure power mode for power saving function.
R estore AC Power Loss
Specify what state to go to when power is re-applied after a power failure (G3
state)
R TC wake system from S5 Disable
Fixed Time: System will wake on the hr::min::sec specified
Chapter 3 – AMI BIOS Setup
ATX Type Optimal Default, Failsafe Default
AT Type
Disabled Optimal Default, Failsafe Default
Enabled
Last State Optimal Default, Failsafe Default
Always On
Always Off
Optimal Default, Failsafe Default
Fixed Time
82